Filter the range by material, stock form and temperature class. Everything listed is held in stock and can be cut to size within 48 hours.
Everyday materials where cost and machinability matter most — ideal for jigs, guides, spacers and general industrial parts.
PE · PP · PVC · ABS · PC · Acrylic65 °C – 120 °C65 – 120 °CThe workhorses of mechanical engineering: good strength, stiffness and wear resistance at a competitive price.
POM-C · POM-H · PA66 · PA6 · PET · PBT120 °C – 230 °C120 – 230 °CHigh-temperature, chemically resistant grades for semiconductor, chemical and food-processing equipment.
PPS · PEI/ULTEM · PSU · PES · PVDF · PTFE230 °C – 425 °C230 – 425 °CThe top of the pyramid — for the harshest thermal, chemical and mechanical duty cycles in aerospace, oil and gas and medical.
PEEK · PEEK-CF · PAI (Torlon) · PBI18 grades shown
Unfilled virgin PEEK — the highest specification stock shape we hold, machinable to ±0.02 mm.
Carbon-fibre reinforced PEEK with 3× the stiffness and 2× the thermal conductivity of unfilled PEEK.
PEEK with controlled surface resistivity of 10⁶–10⁹ Ω for high-temperature ESD-safe fixtures.
Copolymer acetal with low residual stress — the best all-round choice for precision machined parts.
Homopolymer acetal — higher stiffness, hardness and creep resistance than POM-C.
Dissipative acetal sheet for electronics jigs, trays and fixtures — 10⁶–10⁸ Ω.
Chemically resistant PPS with UL94 V-0 rating and near-zero water absorption.
Glass-reinforced PPS for high-stiffness, low-creep structural parts at elevated temperature.
Unfilled polyetherimide — transparent, flame retardant and dimensionally stable to 170 °C.
Glass-filled PEI with higher stiffness and a lower coefficient of thermal expansion.
Tough extruded nylon with excellent abrasion resistance for gears, rollers and wear pads.
Cast nylon with better machinability and larger sections than extruded stock; MoS₂ grades available.
Lowest friction of any solid, −200 °C to +260 °C, universal chemical resistance.
Glass-filled PTFE with 4× better wear resistance and reduced creep under load.
Best-in-class abrasion resistance and the lowest friction of any thermoplastic.
High-purity fluoropolymer for ultra-pure water, semiconductor and pharmaceutical lines.
Machine guards and sight windows with 200× the impact strength of glass, optically clear.
Transparent-alternative dissipative sheet for electronics enclosures and machine covers.
No grades match those filters. Try clearing the search box, or ask us for a specific grade.
Cut-to-size from stock is our core service. When a part needs more than a saw cut, our CNC department mills, turns and faces it to your tolerance.
Thickness 0.5 – 150 mm, standard 1000 × 2000 mm and 610 × 1220 mm, sawn or CNC-milled to your drawing.
Diameter 6 – 300 mm, lengths 1000 mm / 2000 mm / 3000 mm, round, square and hollow bar.
OD 20 – 400 mm with wall thickness from 5 mm, ideal for bushes, insulating sleeves and rollers.
Milling, turning and mirror facing from DXF or STEP. Tolerances to plus or minus 0.02 mm on machined faces, in any stocked material.
Tell us the material, the size and how many pieces. If you are not sure about the material, describe the application and we will recommend one.
