Tough, abrasion-resistant nylon in extruded and cast form — excellent for gears, rollers and wear pads.
Extruded PA66 and MC cast nylon (PA6) are stocked in rod and sheet, including molybdenum-disulphide filled grades for dry-running bearings and food-grade variants. Cast nylon offers larger diameters and better machinability than extruded stock.
| Density | 1.15 g/cm³ |
|---|---|
| Tensile strength | 82 MPa |
| Continuous service temp. | 100 °C |
| Water absorption (24 h) | 1.3 % |
| Impact strength | 4.0 kJ/m² |
| Coefficient of friction | 0.25 |
Cut to size from stock, or machined to your drawing. Ask about sizes not listed — we can bring in non-standard sections.
Tough extruded nylon with excellent abrasion resistance for gears, rollers and wear pads.
Cast nylon with better machinability and larger sections than extruded stock; MoS₂ grades available.
The benchmark high-performance thermoplastic: 250 °C continuous, near-universal chemical resistance, machinable to tight tolerance.
High stiffness, low friction and outstanding dimensional stability — the default choice for precision mechanical parts.
Excellent chemical resistance and 220 °C capability at a fraction of PEEK cost — the workhorse of the chemical industry.
Tell us the material, the size and how many pieces. If you are not sure about the material, describe the application and we will recommend one.
