Glass-reinforced PPS for high-stiffness, low-creep structural parts at elevated temperature.
PPS sheet and rod deliver outstanding resistance to acids, bases and solvents with very low moisture uptake. Glass-fibre and carbon-fibre filled grades raise stiffness and reduce thermal expansion. Widely used for pump components, valve bodies, heat-exchanger parts and semiconductor wet-bench fixtures.
| Material family | PPS — Polyphenylene Sulfide |
|---|---|
| Stock form | Sheet |
| Colour | Black |
| Continuous service temperature | 220 °C |
| Available sizes | Sheet 8–50 mm |
| Temperature class | Advanced Engineering |
Values are typical for the unfilled grade and are given for guidance. Request the current lot certificate for specification purposes.
| Density | 1.35 g/cm³ |
|---|---|
| Tensile strength | 90 MPa |
| Continuous service temp. | 220 °C |
| Water absorption (24 h) | 0.02 % |
| Flammability | UL94 V-0 |
| Dielectric strength | 17 kV/mm |
Send the plate size or rod length and diameter. Saw cut and squared within 48 hours of order confirmation.
Send DXF, STEP or a dimensioned PDF. Milled, turned and faced to your tolerance, inspection report on request.
Certificate of conformity with grade, colour and lot number. FDA, EU 10/2011 and ISO 10993 paperwork where the grade supports it.
Moisture barrier, edge protection and wooden case. Air, LCL and FCL shipping with full export documentation.
Chemically resistant PPS with UL94 V-0 rating and near-zero water absorption.
Unfilled virgin PEEK — the highest specification stock shape we hold, machinable to ±0.02 mm.
Carbon-fibre reinforced PEEK with 3× the stiffness and 2× the thermal conductivity of unfilled PEEK.
Tell us the material, the size and how many pieces. If you are not sure about the material, describe the application and we will recommend one.
