Tough extruded nylon with excellent abrasion resistance for gears, rollers and wear pads.
Extruded PA66 and MC cast nylon (PA6) are stocked in rod and sheet, including molybdenum-disulphide filled grades for dry-running bearings and food-grade variants. Cast nylon offers larger diameters and better machinability than extruded stock.
| Material family | PA66 — PA66 / PA6 Cast Nylon |
|---|---|
| Stock form | Rod |
| Colour | Ivory / Natural |
| Continuous service temperature | 100 °C |
| Available sizes | Rod Ø10–200 mm |
| Temperature class | Engineering Plastics |
Values are typical for the unfilled grade and are given for guidance. Request the current lot certificate for specification purposes.
| Density | 1.15 g/cm³ |
|---|---|
| Tensile strength | 82 MPa |
| Continuous service temp. | 100 °C |
| Water absorption (24 h) | 1.3 % |
| Impact strength | 4.0 kJ/m² |
| Coefficient of friction | 0.25 |
Send the plate size or rod length and diameter. Saw cut and squared within 48 hours of order confirmation.
Send DXF, STEP or a dimensioned PDF. Milled, turned and faced to your tolerance, inspection report on request.
Certificate of conformity with grade, colour and lot number. FDA, EU 10/2011 and ISO 10993 paperwork where the grade supports it.
Moisture barrier, edge protection and wooden case. Air, LCL and FCL shipping with full export documentation.
Cast nylon with better machinability and larger sections than extruded stock; MoS₂ grades available.
Unfilled virgin PEEK — the highest specification stock shape we hold, machinable to ±0.02 mm.
Carbon-fibre reinforced PEEK with 3× the stiffness and 2× the thermal conductivity of unfilled PEEK.
Tell us the material, the size and how many pieces. If you are not sure about the material, describe the application and we will recommend one.
