Static-dissipative PU elastomer sheet, 6–50 mm at 600 × 600 mm, Shore 60A–90A — 10⁶–10⁸ Ω·cm in black or translucent green.
Abrasion-resistant cast elastomer with high rebound and cut resistance — chute liners, gripper jaws, sealing pads and impact parts, in black and static-dissipative translucent green.
| Material family | PU — Polyurethane Elastomer |
|---|---|
| Stock form | Sheet |
| Colour | Black / Transparent green |
| Continuous service temperature | 80 °C |
| Available sizes | Sheet 6 – 50 mm · 600 × 600 mm |
| Temperature class | Engineering Plastics |
Values are typical for the unfilled grade and are given for guidance. Request the current lot certificate for specification purposes.
| Volume resistivity | 10⁶ – 10⁸ Ω·cm |
|---|---|
| Shore hardness | 60A – 90A |
| Thickness | 6 – 50 mm |
| Sheet size | 600 × 600 mm |
| Colour | Black / Transparent green |
| Density | 1.15 g/cm³ |
| Tensile strength | 35 MPa |
| Elongation at break | 450 % |
| Continuous service temp. | 80 °C |
Send the plate size or rod length and diameter. Saw cut and squared within 48 hours of order confirmation.
Send DXF, STEP or a dimensioned PDF. Milled, turned and faced to your tolerance, inspection report on request.
Certificate of conformity with grade, colour and lot number. FDA, EU 10/2011 and ISO 10993 paperwork where the grade supports it.
Moisture barrier, edge protection and wooden case. Air, LCL and FCL shipping with full export documentation.
Sheet and Rod
Unfilled virgin PEEK — the highest specification stock shape we hold, machinable to ±0.02 mm.
Sheet and Rod
Carbon-fibre reinforced PEEK with 3× the stiffness and 2× the thermal conductivity of unfilled PEEK.
Sheet and Rod
Copolymer acetal with low residual stress — the best all-round choice for precision machined parts.
Tell us the material, the size and how many pieces. If you are not sure about the material, describe the application and we will recommend one.
