{"id":561,"date":"2026-10-26T07:34:35","date_gmt":"2026-10-25T23:34:35","guid":{"rendered":"https:\/\/cntopplastics.com\/machining-esd-plastics-resistivity\/"},"modified":"2026-10-26T07:34:35","modified_gmt":"2026-10-25T23:34:35","slug":"machining-esd-plastics-resistivity","status":"publish","type":"post","link":"https:\/\/cntopplastics.com\/es\/machining-esd-plastics-resistivity\/","title":{"rendered":"Machining ESD plastics without losing the resistivity"},"content":{"rendered":"

Machining ESD plastic looks like ordinary machining until a part fails a resistivity check after it has been cut. The grade carries a conductive filler, usually carbon black or carbon fibre, that forms a network through the polymer, and that network is what moves charge away from the surface. Cutting, sanding and heat can disturb it.<\/p>\n

This guide explains where the conductive network sits, how normal shop practice can damage it, and what to measure before a part is accepted. It is written for engineers who have a resistivity band on the drawing and need the process to meet it, not just the feedstock.<\/p>\n

How dissipative grades get their conductivity<\/h2>\n

Static-dissipative and conductive plastics are made by compounding a base polymer with a filler. Carbon black gives a low-cost dissipative grade in the 10^6 to 10^9 ohm-per-square band; carbon fibre gives a stiffer, more conductive material that can reach the conductive band. The filler does not have to touch everywhere: it forms a percolation network, and conductivity depends on how continuous that network is.<\/p>\n

That is the key point for machining. The network is a three-dimensional structure through the whole section, so as long as the filler loading is comfortably above the percolation threshold, cutting a surface exposes fresh filler and the part stays conductive. Below the threshold, or in a poorly dispersed batch, the margins are thin and small changes can tip the part into the insulative band.<\/p>\n

A common mistake is to assume a dissipative sheet behaves the same on every face. Extrusion and compression routes can orient the filler differently, and a cut face can read a little higher than the moulded skin it came from. That is normal, and it is one reason a specification should define exactly where the reading is taken.<\/p>\n

We stock dissipative and conductive grades as sheet, rod and tube across our ESD materials<\/a> range, and the first question on any enquiry is always which band the part has to hold.<\/p>\n

PEEK ESD dissipative black sheet. Dissipative PEEK sheet<\/figure>\n

Where machining damages the conductive network<\/h2>\n

Three habits cause most resistivity drift: heat, abrasion and contamination. Heat is the most common. A dull tool, a fast feed or a dry cut raises the surface temperature, and carbon-black-loaded polymers can re-anneal or smear at the skin, changing the local filler concentration.<\/p>\n

Abrasion from sanding and polishing is next. A belt or flap wheel removes the resin-rich layer and can pull carbon black out of the top surface or smear it into a film that reads differently from the bulk. Grit media also embed foreign particles between the probes and the surface.<\/p>\n

Contamination is quieter but real. Coolant, hand oils and release agents leave a resistive film, so a part that measured well an hour after cutting can fail after it has been handled and wiped. Choosing a grade that holds its band after machining ESD plastic is the subject of our ESD material selection<\/a> guide.<\/p>\n

Coolant, heat and the safe process window<\/h2>\n

For most filled grades a sharp carbide cutter, moderate speed and a steady feed keep the surface cool enough that the network is untouched. Flood coolant or a strong air blast carries heat away and clears the swarf before it can be re-cut. The aim is a free-cutting action, not a burnished one.<\/p>\n

Where the material is heat-sensitive, such as carbon-filled PEEK<\/a> or a glass-filled grade, a slower surface speed and a positive rake reduce friction. In our experience the parts that fail are almost always the ones cut hot, and a polished-looking surface with a burnt smell is a warning, not a finish. The whole aim when machining ESD plastic is to remove material before the surface gets hot enough to reflow, not to leave it bright.<\/p>\n

POM ESD anti-static sheet. Anti-static POM sheet<\/figure>\n

Surface resistivity versus volume resistivity<\/h2>\n

The two measurements answer different questions. Surface resistivity describes how easily charge moves across the surface, and it is the number that matters when the part bleeds charge away at the point of contact. Volume resistivity describes conduction through the body of the material and governs whether the part can be grounded through a fixing.<\/p>\n

A part can pass one and fail the other. A thin, resin-rich skin can read insulative on the surface while the bulk is still conductive, and a contaminated surface film does the same. For a lightly filled POM<\/a> dissipative grade the gap is wider than for a well-loaded PEEK, but it still has to be checked on every part.<\/p>\n

Grounding is the other half of the picture. A dissipative part only protects a device if the charge it collects has somewhere to go, so the fixings, the mating metal and the earth path matter as much as the polymer. Resistivity sets the pace of the bleed; the ground path decides whether it works at all.<\/p>\n\n\n\n\n\n\n\n\n
Grade type<\/th>\nResistividad superficial<\/th>\nWhat it does<\/th>\nTypical example<\/th>\n<\/tr>\n<\/thead>\n
Insulative<\/td>\nAbove 10^12 ohm\/sq<\/td>\nLets charge build up<\/td>\nUnfilled POM, PEEK, PEI<\/td>\n<\/tr>\n
Dissipative<\/td>\n10^6 to 10^9 ohm\/sq<\/td>\nBleeds charge slowly<\/td>\nCarbon-black POM, PEEK ESD<\/td>\n<\/tr>\n
Conductive<\/td>\n10^3 to 10^6 ohm\/sq<\/td>\nDischarges fast, grounds well<\/td>\nCarbon-fibre filled grades<\/td>\n<\/tr>\n
Volume conductive<\/td>\n10^3 to 10^6 ohm-cm<\/td>\nCarries current through the section<\/td>\nCF-filled PEEK, PPS<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Questions buyers ask about machining ESD plastics<\/h2>\n

Can I sand or polish an ESD part?<\/h3>\n

Only with care, and never as a routine finish. Sanding removes the resin-rich skin and can pull filler out of the surface, which is exactly the layer the probes read. If a fine finish is needed, keep the cut cool and take the last pass with a sharp tool rather than abrasive paper.<\/p>\n

Does coolant change the resistivity?<\/h3>\n

Wet cutting is fine, but residue is not. Flood coolant keeps the surface cool, which protects the network, yet the film it leaves behind is resistive and will fail a surface test if it is not removed. Wash and dry the part to an agreed method before measuring.<\/p>\n

What should the drawing say about resistivity?<\/h3>\n

State the band, the test method and the condition of the surface at the time of test. A bare figure of 10^6 ohm per square means little unless it says whether surface or volume is meant, and whether the part is measured as-machined, cleaned or after ageing.<\/p>\n

How soon after machining should a part be tested?<\/h3>\n

As soon as the part is clean and dry, and again after a defined settling period. Surface condition can drift over the first hours, so a reading taken on a freshly wiped part is not the same as one taken the next day. Where the band is narrow, fix the test point and keep to it for every delivery, and pull a reference block from our stock shapes<\/a> so the incoming and outbound readings are comparable.<\/p>\n","protected":false},"excerpt":{"rendered":"

Cortar, lijar o sobrecalentar un grado disipativo puede desplazar la resistividad superficial d\u00e9cadas. C\u00f3mo mecanizar pl\u00e1sticos ESD y verificar el resultado.<\/p>\n","protected":false},"author":193679612,"featured_media":220,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_coblocks_attr":"","_coblocks_dimensions":"","_coblocks_responsive_height":"","_coblocks_accordion_ie_support":"","advanced_seo_description":"","jetpack_seo_html_title":"","jetpack_seo_noindex":false,"jetpack_seo_schema_type":"","_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_wpcom_ai_launchpad_first_post":false,"_tp_seo_title":"","_tp_seo_desc":"","_tp_summary":"","_tp_updated":"","_jetpack_feature_clip_id":0,"_jetpack_hide_featured_image":false,"_jetpack_featured_image_duplicate_dismissed":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[132593],"tags":[132591,132588],"class_list":["post-561","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-machining","tag-machining","tag-technical"],"jetpack_publicize_connections":[],"jetpack_likes_enabled":true,"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/pcp8Cz-93","jetpack-related-posts":[{"id":864,"url":"https:\/\/cntopplastics.com\/es\/antistatic-abs-vs-pom\/","url_meta":{"origin":561,"position":0},"title":"ESD ABS o ESD POM: c\u00f3mo elegir pl\u00e1stico antiest\u00e1tico para utillajes y manipulaci\u00f3n","author":"jessemei","date":"2026-10-31","format":false,"excerpt":"Both are sold as dissipative sheet and rod, both machine cleanly, and both cost far less than PEEK. The choice turns on wear debris, solvent exposure and how tight the tolerance has to stay after a thousand wipes.","rel":"","context":"En \u00abTechnical Notes\u00bb","block_context":{"text":"Technical Notes","link":"https:\/\/cntopplastics.com\/es\/category\/technical-notes\/"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":534,"url":"https:\/\/cntopplastics.com\/es\/semiconductor-wafer-handling-plastic-parts\/","url_meta":{"origin":561,"position":1},"title":"Plastic parts for wafer handling: what actually matters","author":"jessemei","date":"2026-10-20","format":false,"excerpt":"Wafer-handling parts are judged on particles, outgassing, ESD and stability, not datasheet strength. Choose the grade, then verify the process.","rel":"","context":"En \u00abIndustry Applications\u00bb","block_context":{"text":"Industry Applications","link":"https:\/\/cntopplastics.com\/es\/category\/industry-applications\/"},"img":{"alt_text":"Black ESD PEEK stock: three stacked black PEEK plates, a black PEEK rod disc and a machined PEEK bushing","src":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-esd.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-esd.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-esd.jpg?fit=1000%2C1000&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-esd.jpg?fit=1000%2C1000&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":100,"url":"https:\/\/cntopplastics.com\/es\/selecting-esd-material\/","url_meta":{"origin":561,"position":2},"title":"C\u00f3mo elegir un material ESD: resistividad superficial y volum\u00e9trica explicadas","author":"jessemei","date":"2026-09-12","format":false,"excerpt":"10 to the power 6 through 10 to the power 9 ohms sounds simple until you look at the datasheet. Here is what surface and volume resistivity actually mean for fixture design, and which carriers to avoid.","rel":"","context":"En \u00abMaterial Guide\u00bb","block_context":{"text":"Material Guide","link":"https:\/\/cntopplastics.com\/es\/category\/material-guide\/"},"img":{"alt_text":"Choosing an ESD material: surface vs volume resistivity explained","src":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-esd-material-selection.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-esd-material-selection.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-esd-material-selection.jpg?fit=1000%2C1000&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-esd-material-selection.jpg?fit=1000%2C1000&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":558,"url":"https:\/\/cntopplastics.com\/es\/peek-30-carbon-fibre-when-to-use\/","url_meta":{"origin":561,"position":3},"title":"PEEK 30% carbon fibre: when it beats unfilled PEEK","author":"jessemei","date":"2026-10-22","format":false,"excerpt":"Carbon fibre triples PEEK's stiffness and halves its thermal expansion, but cuts impact strength. A decision guide for bearings, seals and structures.","rel":"","context":"En \u00abMaterial Guide\u00bb","block_context":{"text":"Material Guide","link":"https:\/\/cntopplastics.com\/es\/category\/material-guide\/"},"img":{"alt_text":"PEEK 30% Carbon Fibre","src":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-cf30.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-cf30.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-cf30.jpg?fit=1000%2C1000&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-peek-cf30.jpg?fit=1000%2C1000&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":184,"url":"https:\/\/cntopplastics.com\/es\/grade-naming-explained\/","url_meta":{"origin":561,"position":4},"title":"C\u00f3mo leer nuestros c\u00f3digos de grado","author":"jessemei","date":"2025-11-06","format":false,"excerpt":"TP-PEEK-CF30-BLK tells you the polymer, the filler, the level and the colour. Once you know the pattern, a quotation becomes much easier to read.","rel":"","context":"En \u00abMaterial Guide\u00bb","block_context":{"text":"Material Guide","link":"https:\/\/cntopplastics.com\/es\/category\/material-guide\/"},"img":{"alt_text":"How to read our grade codes","src":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-grade-naming-explained.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-grade-naming-explained.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-grade-naming-explained.jpg?fit=1000%2C1000&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-grade-naming-explained.jpg?fit=1000%2C1000&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":104,"url":"https:\/\/cntopplastics.com\/es\/semiconductor-esd-fixtures\/","url_meta":{"origin":561,"position":5},"title":"Utillajes ESD para pruebas de semiconductores: materiales que superan la cualificaci\u00f3n","author":"jessemei","date":"2026-09-03","format":false,"excerpt":"Test sockets and wafer-handling fixtures fail qualification for three reasons \u2014 resistivity drift, outgassing and particulate. Here is how to close all three at once.","rel":"","context":"En \u00abIndustry Applications\u00bb","block_context":{"text":"Industry Applications","link":"https:\/\/cntopplastics.com\/es\/category\/industry-applications\/"},"img":{"alt_text":"ESD fixtures for semiconductor test: material choices that pass qualification","src":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-semiconductor-esd-fixtures.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-semiconductor-esd-fixtures.jpg?fit=1000%2C1000&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-semiconductor-esd-fixtures.jpg?fit=1000%2C1000&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/n-semiconductor-esd-fixtures.jpg?fit=1000%2C1000&ssl=1&resize=700%2C400 2x"},"classes":[]}],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/cntopplastics.com\/wp-content\/uploads\/2026\/10\/tp-pom-esd.jpg?fit=1000%2C1000&ssl=1","_links":{"self":[{"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/posts\/561","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/users\/193679612"}],"replies":[{"embeddable":true,"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/comments?post=561"}],"version-history":[{"count":0,"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/posts\/561\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/media\/220"}],"wp:attachment":[{"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/media?parent=561"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/categories?post=561"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cntopplastics.com\/es\/wp-json\/wp\/v2\/tags?post=561"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}